Wheel Opening Moulding: Installation

HINT

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.

1. INSTALL FRONT FENDER WHEEL OPENING MOULDING LH 
   1. Attach the clip to install the moulding.
   Fig 1: Identifying Front Fender Wheel Opening Moulding LH
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Install the 5 screws
2. INSTALL QUARTER PANEL WHEEL OPENING MOULDING LH 
   1. Install the moulding with the 4 screws.
   Fig 2: Identifying Front Fender Wheel Opening Moulding And Screws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002