Multiplex Tilt And Telescopic Ecu: Removal

REMOVE STEERING COLUMN ASSEMBLY
HINT:

Refer to the instructions for removal of the steering column assembly (See REMOVAL ).
REMOVE STEERING LOCK ACTUATOR ASSEMBLY
1. Using a center punch, mark the center of the 2 tapered-head bolts.
2. Using a 3 to 4 mm (0.12 to 0.16 in.) drill, drill a hole in the 2 bolts.
3. Using a screw extractor, remove the 2 bolts and steering lock actuator assembly from the steering column assembly.
  
  Fig 1: Removing Bolts And Steering Lock Actuator Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE MULTIPLEX TILT AND TELESCOPIC ECU
1. Disconnect the ECU connector.
2. Using a screwdriver, remove the 2 screws and ECU.
  
  Fig 2: Identifying Multiplex Tilt And Telescopic ECU Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002