LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> LS 460L >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System & Circuit Troubleshooting, Component Inspection And R & I >> Engine Coolant Temperature Sensor >> Removal

Engine Coolant Temperature Sensor: Removal

  1. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL  )
  2. REMOVE AIR CLEANER INLET COVER  (See REMOVAL  )
  3. REMOVE NO. 1 AIR CLEANER INLET  (See REMOVAL  )
  4. REMOVE NO. 1 ENGINE UNDER COVER  (See COOLANT )
  5. DRAIN ENGINE COOLANT  (See COOLANT )
  6. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the engine coolant temperature sensor connector.
    2. Remove the engine coolant temperature sensor.
    3. Remove the gasket from the engine coolant temperature sensor.
      Fig 1: Locating Engine Coolant Temperature Sensor Connector
      G04943082Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals