Data List/Active Test
- DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body / (desired menu) / Data List.
- According to the display on the Techstream, read the Data List.
Center Console Switch
TESTER DISPLAY REFERENCE TABLETester Display Measurement Item/Range Normal Condition Diagnostic Note Rear Shade Switch Rear sunshade switch/ON or OFF ON: Rear sunshade switch is pressed
OFF: Rear sunshade switch is not pressed- Rear Console Switch
TESTER DISPLAY REFERENCE TABLETester Display Measurement Item/Range Normal Condition Diagnostic Note Rear Shade Switch Rear sunshade switch/ON or OFF ON: Rear sunshade switch is pressed
OFF: Rear sunshade switch is not pressed- Body No. 4
TESTER DISPLAY REFERENCE TABLETester Display Measurement Item/Range Normal Condition Diagnostic Note Rear Sunshade Close Status of the rear sunshade close/YES or NO YES: Rear sunshade limit switch is OFF (Rear sunshade is lowered)
NO: Rear sunshade limit switch is ON (Rear sunshade is raised)- - ACTIVE TEST
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body / Body No. 4 / Active Test.
- According to the display on the Techstream, perform the Active Test.
Body No. 4
TESTER DISPLAY REFERENCE TABLETester Display Test Part Control Range Diagnostic Note Rear Sunshade Operation Rear Sunshade Operation Down, No or Up -