Inspection Procedure
- CHECK DTC
- Clear the DTC (see DTC CHECK/CLEAR ).
- Perform a road test.
- Check for DTC (see DTC CHECK/CLEAR ).
Result
RESULT TABLE
| Condition | Proceed to |
|---|---|
| DTC is output | A |
| DTC Is not output | B |
HINT:
If a CAN communication malfunction DTC and a related sensor malfunction DTC are output at the same time, the CAN communication malfunction must be repaired before troubleshooting the sensor malfunction DTC.
B: USE SIMULATION METHOD TO CHECK (See HOW TO PROCEED WITH TROUBLESHOOTING )
A: GO TO CAN COMMUNICATION SYSTEM