LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> LS 460 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Deterrent >> Engine Hood Courtesy Switch >> Installation

Engine Hood Courtesy Switch: Installation

  1. INSTALL HOOD LOCK ASSEMBLY  (See INSTALLATION )
  2. INSTALL FRONT FENDER PROTECTOR UPPER LH  (See INSTALLATION )
  3. INSTALL HOOD LOCK CONTROL CABLE COVER  (See INSTALLATION )
  4. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY  (See INSTALLATION )
  5. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY  (See ADJUSTMENT )
  6. INSTALL RADIATOR GRILLE ASSEMBLY  (See INSTALLATION )
  7. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION )
  8. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY  (See INSTALLATION )
  9. INSTALL ENGINE ROOM SIDE COVER RH  (See INSTALLATION )
  10. INSTALL ENGINE ROOM SIDE COVER LH  (See INSTALLATION )
  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  12. INSTALL COWL TOP VENTILATOR LOUVER RH  (See INSTALLATION )
  13. PERFORM INITIALIZATION 
    1. Perform INITIALIZATION .
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals