Stop Light Switch: Inspection

INSPECT STOP LIGHT SWITCH ASSEMBLY

Measure the resistance according to the value(s) in the table below.

Standard Resistance

RESISTANCE SPECIFICATION CHART

Tester Connection	Condition	Specified Condition
1 - 2	Pin pushed	10 kΩ or higher
1 - 2	Pin not pushed	Below 1 Ω
3-4	Pin pushed	Below 1 Ω
3-4	Pin not pushed	10 kΩ or higher

Fig 1: Inspecting Stop Light Switch Assembly

G04944776

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If the result is not as specified, replace the stop light switch.