Map Light Assembly: Installation

INSTALL MAP LIGHT ASSEMBLY
1. Connect the connectors.
2. Attach the 2 clips.
  
  Fig 1: Identifying Map Light Assembly Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the map light with the 2 screws.
  
  Fig 2: Locating Map Light Assembly Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Attach the 2 claws and 2 covers.
  
  Fig 3: Identifying Map Light Assembly Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INSTALL COWL TOP VENTILATOR LOUVER RH (See INSTALLATION )
PERFORM INITIALIZATION

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.