LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> LS 460 >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting >> License Plate Light Assembly >> Installation

License Plate Light Assembly: Installation

  1. INSTALL LICENSE PLATE LIGHT ASSEMBLY 
    1. Install the license plate light with the 2 screws.
      Fig 1: Identifying License Plate Light With Screws
      G04944875Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL BACK DOOR OPENER SWITCH  (See COMPONENTS )
  3. INSTALL BACK DOOR GARNISH RETAINER  (See INSTALLATION )
  4. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH  (See INSTALLATION )
  5. INSTALL REAR LIGHT ASSEMBLY RH 
    1. Install the rear light RH with the 4 nuts.
    2. Connect the connector.
  6. INSTALL REAR LIGHT ASSEMBLY LH  (See INSTALLATION )
  7. INSTALL TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)  (See INSTALLATION )
  8. INSTALL BACK DOOR TRIM COVER  (See INSTALLATION )
  9. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY  (See INSTALLATION )
  10. INSTALL SWITCH BEZEL (w/ Power Trunk Lid System)  (See INSTALLATION )
  11. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP  (See INSTALLATION )
  12. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH  (See INSTALLATION )
  13. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH  (See INSTALLATION )
  14. INSTALL LUGGAGE COMPARTMENT DOOR COVER RH  (See INSTALLATION )
  15. INSTALL LUGGAGE COMPARTMENT DOOR COVER LH  (See INSTALLATION )
scientia non olet · About LEMON Manuals