LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> LS 460 >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting >> Fog Light Assembly >> Installation

Fog Light Assembly: Installation

  1. INSTALL FOG LIGHT ASSEMBLY LH 
    1. Install the fog light LH with the 2 bolts.
    2. Connect the clamp.
      Fig 1: Locating Fog Light Assembly Bolts And Clamps
      G04944852Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT BUMPER COVER  (See INSTALLATION )
  3. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH  (See INSTALLATION )
  4. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH  (See INSTALLATION )
  5. INSTALL RADIATOR GRILLE ASSEMBLY  (See INSTALLATION )
  6. INSTALL FRONT FENDER WHEEL OPENING MOULDING LH  (See INSTALLATION )
  7. INSTALL FRONT FENDER WHEEL OPENING MOULDING RH  (See INSTALLATION )
  8. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION )
  9. INSTALL AIR CLEANER INLET COVER  (See INSTALLATION )
  10. INSTALL ENGINE ROOM SIDE COVER LH  (See INSTALLATION )
  11. INSTALL ENGINE ROOM SIDE COVER  (See INSTALLATION )
  12. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT  (See ADJUSTMENT )
  13. PREPARATION FOR FOG LIGHT AIMING  (See FOG LIGHT ASSEMBLY )
  14. FOG LIGHT AIMING INSPECTION  (See FOG LIGHT ASSEMBLY )
  15. FOG LIGHT AIMING ADJUSTMENT  (See FOG LIGHT ASSEMBLY )
scientia non olet · About LEMON Manuals