LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> LS 460 >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting >> Console Box Light >> Inspection

Console Box Light: Inspection

  1. INSPECT CONSOLE BOX LIGHT 
    1. LED illumination inspection
      1. Apply battery voltage to the terminals of the connector, and check the LED illumination condition.

      OK 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Specified Condition
      10 (RRMP) - 3 (RGND) Rear spot light RH Illuminates
      2 (RLMP) - 3 (RGND) Rear spot light LH Illuminates
      Fig 1: Identifying Console Box Light Connector Terminals
      G04944925Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Measure the resistance according to the value(s) in the table below.

    Standard Resistance 

    RESISTANCE SPECIFICATION CHART

    Tester Connection Switch Condition Specified Condition
    5 (RRSW) - 3 (RGND) Switch on both sides OFF 10 kΩ or higher
    4 (RLSW) - 3 (RGND) Switch on both sides OFF 10 kΩ or higher
    5 (RRSW) - 3 (RGND) Rear right side switch ON Below 1 Ω
    4 (RLSW) - 3 (RGND) Rear left side switch ON Below 1 Ω
    Fig 2: Identifying Console Box Light Connector Terminals
    G04944926Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    If the result is not as specified, replace the console box light.

scientia non olet · About LEMON Manuals