LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical >> Drive Belt >> Removal

Drive Belt: Removal

  1. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  2. REMOVE NO. 1 AIR CLEANER INLET  (See REMOVAL )
  3. SEPARATE RADIATOR RESERVE TANK ASSEMBLY 
    1. Remove the 2 bolts and separate the radiator reserve tank assembly
    Fig 1: Locating Radiator Reserve Tank Bolts
    G05749384Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE V-RIBBED BELT 
    1. Rotate the V-ribbed belt tensioner pulley counterclockwise to loosen the V-ribbed belt tensioner.

      HINT:

      The pulley bolt for the V-ribbed belt tensioner is reverse threaded

      Fig 2: Rotating V-Ribbed Belt Tensioner Pulley Counterclockwise
      G05749385Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. While turning the V-ribbed belt tensioner counterclockwise, align the holes. Insert a bar of 5 mm (0 197 in.) into the holes to secure the V-ribbed belt tensioner in place.
    3. Remove the V-ribbed belt
    Fig 3: Turning V-Ribbed Belt Tensioner Counterclockwise
    G04943242Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals