Emission Control: Canister: Installation

INSTALL CHARCOAL CANISTER ASSEMBLY
1. Install the charcoal canister assembly with the 4 nuts.
  Torque: 15 N*m (150 kgf*cm, 11 ft.*lbf)
  
  Fig 1: Locating Charcoal Canister Assembly Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the 2 quick connectors, hose and connector.
  
  Fig 2: Locating Quick Connectors, Hose And Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the wire harness with the 2 clamps.
Fig 3: Locating Wire Harness Clamps
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 FLOOR UNDER COVER
1. Install the No. 1 floor under cover with the 3 nuts and 6 clips.
Fig 4: Locating No. 1 Floor Under Cover, Nuts And Clips
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).