LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat >> Front Seat Assembly >> Removal

Front Seat Assembly: Removal

  1. PRECAUTION 
    CAUTION: Be sure to read Precaution thoroughly before servicing (See PRECAUTION ).
    NOTE: When replacing the occupant classification ECU, perform registration (See REGISTRATION ).
  2. REMOVE FRONT SEAT HEADREST ASSEMBLY 
  3. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER 
    1. Operate the power seat switch knob and move the seat to the rearmost position.
    2. Disengage the 2 claws and remove the front outer seat track bracket cover
      Fig 1: Identifying Front Outer Seat Track Bracket Cover Claws
      G05754904Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE FRONT INNER SEAT TRACK BRACKET COVER 
    1. Disengage the 2 claws and remove the front inner seat track bracket cover.
      2. Fig 2: Identifying Front Inner Seat Track Bracket Cover Claws
      G05754905Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE REAR OUTER SEAT TRACK BRACKET COVER 
    1. Operate the power seat switch knob and move the seat to the foremost position.
    2. Disengage the 2 claws and remove the rear outer seat track bracket cover.
      Fig 3: Identifying Rear Outer Seat Track Bracket Cover Claws
      G05320986Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE REAR INNER SEAT TRACK BRACKET COVER 
    1. Disengage the 2 claws and remove the rear inner seat track bracket cover
    Fig 4: Identifying Rear Inner Seat Track Bracket Cover Claws
    G05754907Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE FRONT SEAT ASSEMBLY 
    1. Operate the power seat switch knob and move the seat to the foremost position
    2. Remove the 2 bolts on the rear side of the seat
    3. Operate the power seat switch knob and move the seat to the rearmost position
      Fig 5: Identifying Bolts On Rear Side Of Seat
      G05754908Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the 2 bolts on the front side of the seat
      5. Fig 6: Identifying Bolts On Front Side Of Seat
      G05754909Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Operate the power seat switch knob and move the seat to the center position Also, operate the power seat switch knob and move the seatback to the upright position.
    6. Disconnect the cable from the negative (-) battery terminal
      CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system (See PRECAUTION ).
      NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
    7. Disconnect the connectors under the seat.
    8. Remove the front seat assembly
      NOTE: Be careful not to damage the vehicle body.
scientia non olet · About LEMON Manuals