Front Seat Assembly: Disassembly
- REMOVE FRONT SEAT INNER BELT ASSEMBLY
(See
REMOVAL
)
- REMOVE RECLINING POWER SEAT SWITCH KNOB
- Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the reclining power seat switch knob
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
- Using a screwdriver wrapped with protective tape, disengage the 4 claws and remove the slide and vertical power seat switch knob.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY
- Disengage the 2 hooks and remove the 2 rubber bands of the front seatback board from the front seat frame
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Remove the 6 screws
- Disengage the claw and remove the front seat cushion shield assembly.
- Disconnect the connector from the front power seat lumbar switch
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE NO. 1 FRONT SEAT CUSHION INNER SHIELD
- Remove the 2 screws.
- Disengage the claw and remove the No. 1 front seat cushion inner shield from the front seat cushion shield
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE LUMBAR SWITCH
- Remove the 2 screws and the lumbar switch
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE NO. 1 SEAT TRACK LOWER SPACER
- Remove the 2 screws and the No 1 seat track lower spacer.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE FRONT SEAT CUSHION INNER SHIELD
- Remove the screw.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Disengage the claw.
- Separate the guide and remove the front seat cushion inner shield as shown in the illustration
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE NO. 2 SEAT TRACK LOWER SPACER
- Remove the 2 screws and the No 2 seat track lower spacer
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE POWER SEAT SWITCH
- Remove the 3 screws.
- Disconnect the 2 connectors and remove the power seat switch.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE FRONT SEAT CUSHION COVER WITH PAD (for Driver Side)
- w/o Climate Control Seat System:
- Disconnect the 2 connectors.
- Disengage the 3 clamps.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- w/ Climate Control Seat System.
- Disconnect the 2 connectors.
- Disengage the 7 clamps.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Using a clip remover, remove the 2 clips
- Disengage the hooks and remove the front seat cushion cover with pad
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE FRONT SEAT CUSHION COVER WITH PAD (for Front Passenger Side)
- w/o Climate Control Seat System
- Disengage the 2 clamps and separate the occupant detection sensor connector.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- w/ Climate Control Seat System
- Disengage the 2 clamps and separate the occupant detection sensor connector.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Disconnect the 2 connectors.
- Disengage the 4 clamps
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Using a clip remover, remove the 2 clips
- Disengage the hooks and remove the front seat cushion cover with pad.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE OCCUPANT CLASSIFICATION ECU (for Front Passenger Side)
(See
REMOVAL
)
- REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
- Remove the 16 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY
- Open the lower part of the seatback board Then remove the 2 screws.
- Disengage the 2 claws.
- Disengage the 2 hooks and remove the front seatback board sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE FRONT SEAT HEADREST SUPPORT
- Disengage the 4 claws and remove the 2 headrest supports.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE FRONT SEATBACK BOARD COVER SUB-ASSEMBLY
- Remove the hog ring.
- Disengage the hooks and remove the front seatback board cover sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE FRONT SEATBACK COVER WITH PAD
- Remove the 10 hog rings.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Disengage the 2 hooks.
- Remove the 3 hog rings.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Remove the nut and the seatback cover bracket.
- Remove the front seatback cover with pad from the seatback frame.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE SEPARATE TYPE FRONT SEATBACK COVER (w/o Climate Control Seat System)
- Remove the 14 hog rings and the separate type front seatback cover from the separate type front seatback pad.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE SEPARATE TYPE FRONT SEATBACK COVER (w/ Climate Control Seat System)
- Remove the 8 hog rings and the separate type front seatback cover from the separate type front seatback pad
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE FRONT SEATBACK HEATER ASSEMBLY (w/o Climate Control Seat System)
- Cut off the 8 tack pins that fasten the seatback heater, and then remove the front seatback heater assembly from the separate type front seat cushion cover.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE FRONT SEATBACK HEATER ASSEMBLY (w/ Climate Control Seat System)
- Cut off the 7 tack pins that fasten the seatback heater, and then remove the front seatback heater assembly from the separate type front seat cushion cover
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE LOWER RECLINING ADJUSTER INSIDE COVER LH
- Disengage the clamp and disconnect the side airbag wire harness
- Remove the 2 screws and the lower reclining adjuster inside cover LH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE LOWER RECLINING ADJUSTER INSIDE COVER RH
- Disengage the clamp and disconnect the side airbag wire harness
- Remove the 2 screws and the lower reclining adjuster inside cover RH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE UPPER RECLINING ADJUSTER INSIDE COVER LH
- Remove the screw
- Disengage the guide and remove the upper reclining adjuster inside cover LH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE UPPER RECLINING ADJUSTER INSIDE COVER RH
- Remove the screw.
- Disengage the guide and remove the upper reclining adjuster inside cover RH.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE FRONT SEAT LOWER CUSHION SHIELD LH
- Remove the screw.
- Disengage the guide and remove the front seat lower cushion shield LH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE FRONT SEAT LOWER CUSHION SHIELD RH
- Remove the screw
- Disengage the guide and remove the front seat lower cushion shield RH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY
- Disconnect the connector.
- Remove the 2 screws and the lumbar support adjuster assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE SEATBACK CLIMATE CONTROL BLOWER (w/ Climate Control Seat System)
- for Driver Side:
- Disconnect the connector
- Disengage the 3 clamps.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- for Front Passenger Side.
- Disconnect the connector.
- Disengage the clamp.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Using a T30 "TORX" socket, remove the 6 "TORX" bolts and remove the seatback climate control blower and the seatback climate control cover.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE SEAT CUSHION CLIMATE CONTROL DUCT (w/ Climate Control Seat System)
- Disengage the 2 clamps (A) in the direction indicated by the arrow (1)
- Disengage the 2 clamps (B) in the direction indicated by the arrow (2)
- Disengage the 2 claws, and remove the seat cushion climate control duct.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE SEAT CUSHION CLIMATE CONTROL BLOWER (w/ Climate Control Seat System)
- Disconnect the connector
- Remove the screw
- Pull up the bracket of the seat cushion climate control blower as shown in the illustration.
- Disengage the 2 hooks and remove the seat cushion climate control blower
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE SEAT POSITION SENSOR
(See
REMOVAL
)
- REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY
- Disconnect the 2 connectors
- Disengage the 2 clamps and remove the seat heater control sub-assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE FRONT SEAT WIRE
- Disconnect the 3 connectors
- w/o Climate Control Seat System
- Disengage the 7 clamps and remove the front seat wire from the front seat frame assembly with adjuster
- w/ Climate Control Seat System.
- Disengage the 8 clamps and remove the front seat wire from the front seat frame assembly with adjuster
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002