Radio Receiver: Removal

REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (See REMOVAL )
REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH (See REMOVAL )
REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH (See REMOVAL )
REMOVE CONSOLE PANEL SUB-ASSEMBLY (See REMOVAL )
REMOVE FRONT ASH RECEPTACLE ASSEMBLY (See REMOVAL )
REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY (See REMOVAL )
REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL (See REMOVAL )
REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)
1. Remove the 4 bolts.
2. Pull the integration control panel with radio receiver assembly toward the rear of the vehicle.
3. Disconnect each connector and remove the panel.
  
  Fig 1: Locating Integration Control Panel Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 1 RADIO BRACKET (w/o Navigation System)
1. Remove the 6 bolts and No. 1 radio bracket
  
  Fig 2: Locating No. 1 Radio Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 RADIO BRACKET (w/o Navigation System)
1. Remove the 6 bolts and No. 2 radio bracket.
  
  Fig 3: Locating No. 2 Radio Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE RADIO RECEIVER ASSEMBLY (w/o Navigation System)
1. Slide the integration control panel in the direction shown by the arrow to remove the radio receiver assembly
  
  Fig 4: Removing Radio Receiver Assembly (W/O Navigation System)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)
1. Remove the 4 bolts.
2. Pull the multi-display with radio receiver assembly toward the rear of the vehicle.
3. Disconnect each connector and remove the multi-display.
  
  Fig 5: Locating Multi-Display With Radio Receiver Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 1 RADIO BRACKET (w/ Navigation System)
1. Disengage the connector clamp.
  
  Fig 6: Identifying Connector Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 7 bolts and No. 1 radio bracket
  
  Fig 7: Locating No. 1 Radio Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 RADIO BRACKET (w/ Navigation System)
1. Remove the 7 bolts and No. 2 radio bracket
  
  Fig 8: Locating No. 2 Radio Bracket Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE RADIO RECEIVER ASSEMBLY (w/ Navigation System)
1. Slide the multi-display in the direction shown by the arrow to remove the radio receiver assembly.
  
  Fig 9: Removing Radio Receiver Assembly (W/ Navigation System)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002