Air Conditioning Amplifier: Installation

INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY
1. Install the air conditioning amplifier with the screw and connect the connector.
  
  Fig 1: Locating Air Conditioning Amplifier With Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO.2 AIR DUCT
1. Install the No. 2 air duct and screw.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
  
  Fig 2: Locating No. 2 Air Duct With Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (See INSTALLATION )
INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (See INSTALLATION )
INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL SIDE INSTRUMENT PANEL RH (See INSTALLATION )
INSTALL FRONT DOOR OPENING TRIM COVER RH (See INSTALLATION )
INSTALL FRONT DOOR SCUFF PLATE RH (w/o Illumination)
REMOVE FRONT DOOR SCUFF PLATE RH (w/ Illumination)
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION )
INSPECT SRS WARNING LIGHT
(See DIAGNOSIS SYSTEM )