LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (A960E Automatic Transaxle) >> Pattern Select Switch >> Inspection

Pattern Select Switch: Inspection

WARNING: This page is about a different car, the 2008 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT PATTERN SELECT SWITCH 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

    STANDARD RESISTANCE SPECIFICATION

    Switch Condition Tester Connection Specified Condition
    Pattern select switch (PWR) 3 - 7 Below 1 Ω
    Pattern select switch (NORM) 3 - 7 10 kΩ or higher
    Press continuously
    Pattern select switch (SNOW)    		 1 - 3 Below 1 Ω
    Release Pattern select switch (SNOW) 1 - 3 10 kΩ or higher

    If the resistance value is not as specified, replace the pattern select switch.

    Fig 1: Identifying Pattern Select Switch Connector
    G05318238Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals