Valve Body Assembly: Installation

1. Install the check ball body and spring.
   NOTE: Do not drop the check ball body and spring.
   Fig 1: Identifying Check Ball Body And Spring

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Check the accumulator piston, check ball body and spring as shown in the illustration.
   Fig 2: Identifying Accumulator Piston, Check Ball Body And Spring

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Align the groove of the manual valve with the pin of the lever.
   Fig 3: Identifying Lever Pin And Manual Valve

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the 20 bolts.

   Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf) 

   Bolt length: Bolt A: 

   36 mm (1.42 in.) 

   Bolt B: 

   25 mm (0.98 in.) 

   Bolt C: 

   45 mm (1.77 in.) 

   Bolt D: 

   50 mm (1.97 in.) 

   Fig 4: Identifying Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

(See ADJUSTMENT  )

(See INITIALIZATION  )