LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (A760H Automatic Transaxle) >> Transmission Control Switch >> Inspection

Transmission Control Switch: Inspection

WARNING: This page is about a different car, the 2008 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT TRANSMISSION CONTROL SWITCH 
    1. Connect the park/neutral position switch connector.
    2. Disconnect the transmission control switch connector of the shift lock control unit assembly.
    3. Measure the resistance according to the value(s) in the table below.
      Fig 1: Identifying Transmission Control Switch Connector
      G04976052Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Shift Position Tester Connection Specified Condition
      S, "+" and "-" 3 - 7 Below 1 Ω
      Except S, "+" and "-" 3 - 7 10 kΩ or higher

      If the resistance value is not as specified, replace the transmission control switch.

scientia non olet · About LEMON Manuals