LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2GR-FSE) - System And Component Testing, On-Vehicle Inspection, Removal, Inspection & Installation >> Accelerator Pedal >> Installation

Accelerator Pedal: Installation

NOTE:
  • Avoid physical shock to the accelerator pedal.
  • Do not disassemble the accelerator pedal assembly.
  1. INSTALL ACCELERATOR PEDAL 
    1. Install the accelerator pedal with the 2 bolts.

      Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf) 

    2. Connect the accelerator pedal position sensor connector.
    Fig 1: Locating Accelerator Pedal And Bolts
    G05316286Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals