Inspection Procedure

CHECK FOR DTCS
1. Delete the DTCs (See DIAGNOSIS SYSTEM ).
2. Check for DTCs again.
  OK:
  
  DTC B2287, B2284 and B2285 are not output.
  
  HINT:
  - If DTCs B2287, B2284 and B2285 are output, inspect those DTCs first (See DIAGNOSTIC TROUBLE CODE CHART ).
  - If DTCs B2287, B2284 and B2285 are not output, refer to PROBLEM SYMPTOMS TABLE of the smart access system with push-button start (ID code matching inside the cabin cannot be performed) (See PROBLEM SYMPTOMS TABLE ).
NG: GO TO DTC CHART

OK: GO TO SMART ACCESS SYSTEM WITH PUSH-BUTTON START (MATCHING FOR THE INSIDE OF THE CABIN CANNOT BE PERFORMED)