Steering Pad Switch: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (See PRECAUTION ).
REMOVE NO. 3 LOWER STEERING WHEEL COVER (See REMOVAL )
REMOVE NO. 2 LOWER STEERING WHEEL COVER (See REMOVAL )
REMOVE STEERING PAD (See REMOVAL )
REMOVE STEERING PAD SWITCH ASSEMBLY
1. Disconnect the 2 connectors and disengage the clamp.
  
  Fig 1: Locating Steering Pad Switch Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 screws.
3. Disengage the 4 pins and remove the steering pad switch assembly.
  
  Fig 2: Locating Steering Pad Switch Pin With Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002