LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Mirror >> Outer Rear View Mirror >> Inspection

Outer Rear View Mirror: Inspection

  1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/ Memory) 
    1. Inspect outer mirror motor operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

        Standard 

        MEASUREMENT CONDITION SPECIFICATION

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 1 (MV)
        Battery negative (-) → Terminal 10 (M+)        		 Turns upward (A)
        Battery positive (+) → Terminal 10 (M+)
        Battery negative (-) → Terminal 1 (MV)        		 Turns downward (B)
        Battery positive (+) → Terminal 9 (MH)
        Battery negative (-) → Terminal 10 (M+)        		 Turns left (C)
        Battery positive (+) → Terminal 10 (M+)
        Battery negative (-) → Terminal 9 (MH)        		 Turns right (D)
        Fig 1: Inspecting Outer Mirror Motor Operation
        G05828413Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Inspect the retract mirror operation.
      1. Apply battery voltage and check operation of the mirror, as shown in the table below.

        Standard 

        MEASUREMENT CONDITION SPECIFICATION

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 7 (MF)
        Battery negative (-) → Terminal 1 (MV)        		 Returns (Driving position)
        Battery positive (+) → Terminal 1 (MV)
        Battery negative (-) → Terminal 7 (MF)        		 Retracts
    3. Inspect outer mirror heater operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table below.

        Standard 

      MEASUREMENT CONDITION SPECIFICATION

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 3 (HTR+)
      Battery negative (-) → Terminal 9 (HTR-)      		 Mirror surface temperature becomes higher
    4. Inspect electrochromic outer mirror operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

        Standard 

      MEASUREMENT CONDITION SPECIFICATION

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 7 (EC+)
      Battery negative (-) → Terminal 15 (EC-)      		 Mirror surface changes to dark
      Fig 2: Checking Operation Of Mirror Face
      G05828414Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/o Memory) 
    1. Inspect outer mirror motor operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

        Standard 

      MEASUREMENT CONDITION SPECIFICATION

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 5 (MV)
      Battery negative (-) → Terminal 6 (M+)      		 Turns upward (A)
      Battery positive (+) → Terminal 6 (M+)
      Battery negative (-) → Terminal 5 (MV)      		 Turns downward (B)
      Battery positive (+) → Terminal 11 (MH)
      Battery negative (-) → Terminal 6 (M+)      		 Turns left (C)
      Battery positive (+) → Terminal 6 (M+)
      Battery negative (-) → Terminal 11 (MH)      		 Turns right (D)
      Fig 3: Inspecting Outer Mirror Motor Operation
      G05828415Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Inspect the retract mirror operation.
      1. Apply battery voltage and check operation of the mirror, as shown in the table below.

        Standard 

      MEASUREMENT CONDITION SPECIFICATION

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 7 (MF)
      Battery negative (-) → Terminal 1 (MV)      		 Returns (Driving position)
      Battery positive (+) → Terminal 1 (MV)
      Battery negative (-) → Terminal 7 (MF)      		 Retracts
    3. Inspect outer mirror heater operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table below.

        Standard 

      MEASUREMENT CONDITION SPECIFICATION

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 3 (HTR+)
      Battery negative (-) → Terminal 9 (HTR-)      		 Mirror surface temperature becomes higher
    4. Inspect electrochromic outer mirror operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

        Standard 

    MEASUREMENT CONDITION SPECIFICATION

    Measurement Condition Specified Condition
    Battery positive (+) → Terminal 4 (EC+)
    Battery negative (-) → Terminal 10 (EC-)    		 Mirror surface changes to dark
    Fig 4: Checking Operation Of Mirror Face
    G05828416Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/ Memory) 
    1. Inspect outer mirror motor operation.
      1. Remove the outer rear view mirror assembly.
      2. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

        Standard 

      MEASUREMENT CONDITION SPECIFICATION

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 1 (MV)
      Battery negative (-) → Terminal 10 (M+)      		 Turns upward (A)
      Battery positive (+) → Terminal 10 (M+)
      Battery negative (-) → Terminal 1 (MV)      		 Turns downward (B)
      Fig 5: Inspecting Outer Mirror Motor Operation
      G05828417Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      MEASUREMENT CONDITION SPECIFICATION

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 9 (LMHR)
      Battery negative (-) → Terminal 10 (LM+R)      		 Turns left (C)
      Battery positive (+) → Terminal 10 (M+)
      Battery negative (-) → Terminal 9 (MH)      		 Turns right (D)
    2. Inspect the retract mirror operation.
      1. Apply battery voltage and check operation of the mirror, as shown in the table below.

        Standard 

      MEASUREMENT CONDITION SPECIFICATION

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 7 (MF)
      Battery negative (-) → Terminal 1 (MV)      		 Returns (Driving position)
      Battery positive (+) → Terminal 1 (MV)
      Battery negative (-) → Terminal 7 (MF)      		 Retracts
    3. Inspect outer mirror heater operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table below.

        Standard 

      MEASUREMENT CONDITION SPECIFICATION

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 3 (HTR+)
      Battery negative (-) → Terminal 9 (HTR-)      		 Mirror surface temperature becomes higher
    4. Inspect electrochromic outer mirror operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

        Standard 

      MEASUREMENT CONDITION SPECIFICATION

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 7 (EC+)
      Battery negative (-) → Terminal 15 (EC-)      		 Mirror surface changes to dark
      Fig 6: Checking Operation Of Mirror Face
      G05828418Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/o Memory) 
    1. Inspect outer mirror motor operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

        Standard 

      MEASUREMENT CONDITION SPECIFICATION

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 5 (MV)
      Battery negative (-) → Terminal 6 (M+)      		 Turns upward (A)
      Battery positive (+) → Terminal 6 (M+)
      Battery negative (-) → Terminal 5 (MV)      		 Turns downward (B)
      Battery positive (+) → Terminal 11 (MH)
      Battery negative (-) → Terminal 6 (M+)      		 Turns left (C)
      Battery positive (+) → Terminal 6 (M+)
      Battery negative (-) → Terminal 11 (MH)      		 Turns right (D)
      Fig 7: Inspecting Outer Mirror Motor Operation
      G05828419Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Inspect the retract mirror operation.
      1. Apply battery voltage and check operation of the mirror, as shown in the table below.

        Standard 

        MEASUREMENT CONDITION SPECIFICATION

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 7 (MF)
        Battery negative (-) → Terminal 1 (MV)        		 Returns (Driving position)
        Battery positive (+) → Terminal 1 (MV)
        Battery negative (-) → Terminal 7 (MF)        		 Retracts
    3. Inspect outer mirror heater operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table below.

        Standard 

      MEASUREMENT CONDITION SPECIFICATION

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 3 (HTR+)
      Battery negative (-) → Terminal 9 (HTR-)      		 Mirror surface temperature becomes higher
    4. Inspect electrochromic outer mirror operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

        Standard 

        MEASUREMENT CONDITION SPECIFICATION

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 4 (EC+)
        Battery negative (-) → Terminal 10 (EC-)        		 Mirror surface changes to dark
        Fig 8: Checking Operation Of Mirror Face
        G05828420Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals