LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Park Assist / Monitoring >> Ultrasonic Sensor >> Removal

Ultrasonic Sensor: Removal

  1. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  2. REMOVE FRONT BUMPER ASSEMBLY  (See REMOVAL )
  3. REMOVE NO. 1 ULTRASONIC SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the sensor retainer as shown in the illustration.
    3. Remove the No. 1 ultrasonic sensor from the front bumper.
    Fig 1: Identifying No. 1 Ultrasonic Sensor
    G05753872Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE LUGGAGE COMPARTMENT TRIM COVER 
  5. REMOVE DECK SIDE TRIM BOX LH 
  6. REMOVE DECK SIDE TRIM BOX RH 
  7. REMOVE ROPE HOOK ASSEMBLY  (See REMOVAL )
  8. REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER  (See REMOVAL )
  9. REMOVE ROOM LIGHT ASSEMBLY  (See REMOVAL )
  10. REMOVE ROPE HOOK  (See REMOVAL )
  11. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER  (See REMOVAL )
  12. REMOVE LUGGAGE COMPARTMENT TRIM HOOK  (See REMOVAL )
  13. REMOVE SIDE LUGGAGE COMPARTMENT TRIM COVER  (See REMOVAL )
  14. DISCONNECT LUGGAGE ROOM WIRE  (See REMOVAL )
  15. REMOVE REAR BUMPER PLATE  (See REMOVAL )
  16. REMOVE REAR BUMPER ASSEMBLY  (See REMOVAL )
  17. REMOVE NO. 2 ULTRASONIC SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the sensor retainer as shown in the illustration.
    3. Remove the No. 2 ultrasonic sensor from the rear bumper.
  18. REMOVE NO. 1 ULTRASONIC SENSOR 
    1. Disconnect the sensor connector.
      Fig 2: Identifying No. 2 Ultrasonic Sensor
      G05832804Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the sensor retainer as shown in the illustration.
    3. Remove the No. 1 ultrasonic sensor from the rear bumper.
      Fig 3: Identifying No. 1 Ultrasonic Sensor
      G05753872Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals