LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting >> Turn Signal Flasher Assembly >> Removal

Turn Signal Flasher Assembly: Removal

  1. REMOVE STEERING COLUMN COVER (for Manual Tilt and Telescopic)  (See REMOVAL )
  2. REMOVE STEERING COLUMN COVER (for Power Tilt and Power Telescopic)  (See REMOVAL )
  3. REMOVE FRONT DOOR SCUFF PLATE LH (w/o Illumination)  (See REMOVAL )
  4. REMOVE FRONT DOOR SCUFF PLATE LH (w/ Illumination)  (See REMOVAL )
  5. REMOVE FRONT DOOR OPENING TRIM COVER LH  (See REMOVAL )
  6. REMOVE SIDE INSTRUMENT PANEL LH  (See REMOVAL )
  7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  (See REMOVAL )
  8. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  (See REMOVAL )
  9. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY  (See REMOVAL )
  10. REMOVE COMBINATION METER ASSEMBLY  (See REMOVAL )
  11. REMOVE TURN SIGNAL FLASHER ASSEMBLY 
    1. Disconnect the connector.
    2. Disengage the clamp and remove the turn signal flasher assembly.
scientia non olet · About LEMON Manuals