LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting >> Turn Signal Flasher Assembly >> Installation

Turn Signal Flasher Assembly: Installation

  1. INSTALL TURN SIGNAL FLASHER ASSEMBLY 
    1. Install the turn signal flasher assembly with the clamp.
    2. Connect the connector.
  2. INSTALL COMBINATION METER ASSEMBLY  (See INSTALLATION )
  3. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY  (See INSTALLATION )
  4. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  (See INSTALLATION )
  5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  (See INSTALLATION )
  6. INSTALL SIDE INSTRUMENT PANEL LH  (See INSTALLATION )
  7. INSTALL FRONT DOOR OPENING TRIM COVER LH  (See INSTALLATION )
  8. INSTALL FRONT DOOR SCUFF PLATE LH (w/o Illumination)  (See INSTALLATION )
  9. INSTALL FRONT DOOR SCUFF PLATE LH (w/ Illumination)  (See INSTALLATION )
  10. INSTALL STEERING COLUMN COVER (for Power Tilt and Power Telescopic)  (See INSTALLATION )
  11. INSTALL STEERING COLUMN COVER (for Manual Tilt and Telescopic)  (See INSTALLATION )
scientia non olet · About LEMON Manuals