LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting >> Stop Light Control Relay >> Installation

Stop Light Control Relay: Installation

  1. INSTALL STOP LIGHT CONTROL RELAY ASSEMBLY 
    1. Engage the clamp and install the stop light control relay assembly.
    2. Connect the connector.
      3. Fig 1: Locating Clamp And Stop Light Control Relay Assembly
      G05832371Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY  (See INSTALLATION )
  3. CONNECT PASSENGER AIRBAG CONNECTOR  (See INSTALLATION )
  4. INSTALL NO. 2 CONSOLE BOX DUCT (for Manual Transmission)  (See INSTALLATION )
  5. INSTALL NO. 1 CONSOLE BOX DUCT (for Automatic Transmission)  (See INSTALLATION )
  6. INSTALL NO. 2 CONSOLE BOX DUCT (for Automatic Transmission)  (See INSTALLATION )
  7. INSTALL FRONT STEREO COMPONENT SPEAKER ASSEMBLY (w/ Front Center Speaker)  (See INSTALLATION )
  8. INSTALL NO. 3 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY  (See INSTALLATION )
  9. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY  (See INSTALLATION )
  10. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY  (See INSTALLATION )
  11. INSTALL FRONT PILLAR GARNISH LH  (See INSTALLATION )
  12. INSTALL FRONT PILLAR GARNISH RH 
  13. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY  (See INSTALLATION )
  14. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY  (See INSTALLATION )
  15. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See INSTALLATION )
  16. INSTALL SIDE INSTRUMENT PANEL RH  (See INSTALLATION )
  17. INSTALL FRONT DOOR OPENING TRIM COVER RH  (See INSTALLATION )
  18. INSTALL FRONT DOOR SCUFF PLATE RH (w/o Illumination) 
  19. INSTALL FRONT DOOR SCUFF PLATE RH (w/ Illumination) 
  20. INSTALL COMBINATION METER ASSEMBLY  (See INSTALLATION )
  21. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  (See INSTALLATION )
  22. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY  (See INSTALLATION )
  23. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  (See INSTALLATION )
  24. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See INSTALLATION )
  25. INSTALL SIDE INSTRUMENT PANEL LH  (See INSTALLATION )
  26. INSTALL FRONT DOOR OPENING TRIM COVER LH  (See INSTALLATION )
  27. INSTALL FRONT DOOR SCUFF PLATE LH (w/o Illumination)  (See INSTALLATION )
  28. INSTALL FRONT DOOR SCUFF PLATE LH (w/ Illumination)  (See INSTALLATION )
  29. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY  (See INSTALLATION )
  30. INSTALL STEERING COLUMN COVER (for Manual Tilt and Telescopic)  (See INSTALLATION )
  31. INSTALL STEERING COLUMN COVER (for Power Tilt and Power Telescopic)  (See INSTALLATION )
  32. ADJUST SPIRAL CABLE SUB-ASSEMBLY  (See INSTALLATION )
  33. INSTALL STEERING WHEEL ASSEMBLY  (See INSTALLATION )
  34. INSTALL STEERING PAD  (See INSTALLATION )
  35. INSTALL LOWER NO. 3 STEERING WHEEL COVER  (See INSTALLATION )
  36. INSTALL LOWER NO. 2 STEERING WHEEL COVER  (See INSTALLATION )
  37. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)  (See INSTALLATION )
  38. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)  (See INSTALLATION )
  39. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL  (See INSTALLATION )
  40. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY  (See INSTALLATION )
  41. INSTALL CONSOLE BOX  (See INSTALLATION )
  42. INSTALL CONSOLE BOX REGISTER ASSEMBLY  (See INSTALLATION )
  43. INSTALL FRONT ASH RECEPTACLE SUB-ASSEMBLY  (See INSTALLATION )
  44. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)  (See INSTALLATION )
  45. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission)  (See INSTALLATION )
  46. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission)  (See INSTALLATION )
  47. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission)  (See INSTALLATION )
  48. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission)  (See INSTALLATION )
  49. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) 
  50. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) 
  51. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  52. PERFORM INITIALIZATION 
    NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION ).
  53. INSPECT STEERING PAD  (See INSTALLATION )
  54. INSPECT SRS WARNING LIGHT 

    (See DIAGNOSIS SYSTEM )

scientia non olet · About LEMON Manuals