Rear Combination Light Assembly: Reassembly

INSTALL REAR LIGHT LENS
INSTALL REAR LIGHT SOCKET AND WIRE
1. Connect the connector.
2. Install the rear light socket and wire.
INSTALL BACK UP LIGHT BULB
1. Install the back up light bulb.
  
  Fig 1: Locating Rear Light Socket And Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR COMBINATION LIGHT BODY GASKET
1. Remove the release paper from a new rear combination light body gasket.
  NOTE:
  - Be sure to remove all the traces of the old gasket from the body.
  - Do not reuse the removed gasket. Be sure to install a new rear combination light body gasket to prevent water ingress.
2. Align the rear combination light body gasket with the 3 stud bolts and install the gasket as shown in the illustration.
  
  Fig 2: Identifying Release Paper From Rear Combination Light Body Gasket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR COMBINATION LIGHT LENS AND BODY
INSTALL REAR LIGHT SOCKET AND WIRE
1. Connect the connector and install the rear light socket and wire.
INSTALL REAR TURN SIGNAL LIGHT BULB
1. Install the rear turn signal light bulb.
  
  Fig 3: Locating Connector And Rear Light Socket And Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR COMBINATION LIGHT BODY GASKET
1. Remove the release paper from a new rear combination light body gasket.
  NOTE:
  - Be sure to remove all the traces of the old gasket from the body.
  - Do not reuse the removed gasket. Be sure to install a new rear combination light body gasket to prevent water ingress.
2. Align the rear combination light body gasket with the 3 stud bolts and install the gasket as shown in the illustration.
  
  Fig 4: Locating Rear Combination Light Body Gasket With Stud Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002