LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting >> Headlight Dimmer Switch >> Installation

Headlight Dimmer Switch: Installation

  1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY 
    1. Install the headlight dimmer switch assembly as shown in the illustration.
      Fig 1: Identifying Headlight Dimmer Switch Assembly
      G05832315Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the headlight dimmer switch assembly with the claw and the clamp.
    3. Connect the connector.
      4. Fig 2: Identifying Headlight Dimmer Switch Assembly With Claw And Clamp
      G05832316Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY  (See INSTALLATION )
  3. INSTALL SPIRAL CABLE WITH STEERING ANGLE SENSOR  (See INSTALLATION )
  4. INSTALL STEERING COLUMN COVER (for Manual Tilt and Telescopic)  (See INSTALLATION )
  5. INSTALL STEERING COLUMN COVER (for Power Tilt and Power Telescopic)  (See INSTALLATION )
  6. INSTALL STEERING WHEEL ASSEMBLY  (See INSTALLATION )
  7. INSTALL STEERING PAD  (See INSTALLATION )
  8. INSTALL NO. 3 LOWER STEERING WHEEL COVER  (See INSTALLATION )
  9. INSTALL NO. 2 LOWER STEERING WHEEL COVER  (See INSTALLATION )
  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  11. PERFORM INITIALIZATION 

    Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION ).

  12. INSPECT SRS WARNING LIGHT 

    (See DIAGNOSIS SYSTEM )

scientia non olet · About LEMON Manuals