Headlight Assembly: Installation

INSTALL HEADLIGHT ASSEMBLY
1. Install the headlight assembly with the headlight bracket pin.
2. Install the 3 bolts.
3. Connect the connector.
  
  Fig 1: Identifying Headlight Assembly And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT UPPER FENDER PROTECTOR
1. Install the front upper fender protector with the 2 claws and 3 clips.
  
  Fig 2: Identifying Front Upper Fender Protector, Claws And Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ENGINE ROOM SIDE COVER
1. Install the engine room side cover with the nut.
2. Install the 4 clips.
INSTALL FRONT BUMPER ENERGY ABSORBER
INSTALL FRONT BUMPER ASSEMBLY
INSTALL COOL AIR INTAKE DUCT SEAL
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for HID Headlight)
VEHICLE PREPARATION FOR HEADLIGHT AIM ADJUSTMENT (See ADJUSTMENT )
PREPARATION FOR HEADLIGHT AIMING (Using a tester) (See ADJUSTMENT )
PREPARATION FOR HEADLIGHT AIMING (Using a screen) (See ADJUSTMENT )
HEADLIGHT AIMING INSPECTION (See ADJUSTMENT )
HEADLIGHT AIMING ADJUSTMENT (See ADJUSTMENT )
PERFORM INITIALIZATION (for HID Headlight)
Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION ).