Inspection Procedure
NOTE:
When the millimeter wave radar sensor is replaced with a new one, adjustment of the radar sensor beam axis must be performed (see ADJUSTMENT
).
- ADJUST MILLIMETER WAVE RADAR SENSOR
Refer to ADJUSTMENT .
HINT:
It is necessary to make the ECM recognize specification information (whether the vehicle is equipped with the dynamic radar cruise control system or not). When this procedure has not been carried out, this DTCs may be output.
- Clear the DTC and then recheck for DTCs.
OK: DTC is not output
NG: REPLACE MILLIMETER WAVE RADAR SENSOR
OK: SYSTEM OK
- Clear the DTC and then recheck for DTCs.