LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control >> Clutch Switch >> Installation

Clutch Switch: Installation

  1. INSTALL CLUTCH SWITCH ASSEMBLY 
    1. Fully loosen the lock nut of the clutch switch assembly.
    2. Adjust the clutch switch until the threaded portion makes gentle contact with the cushion. Tighten the lock nut and verify the contact of the switch threaded portion with the cushion.

      Torque: 15.7 N*m (160 kgf*cm, 12 ft.*lbf) 

    3. Connect the connector.
      Fig 1: Identifying Lock Nut And Cushion
      G05832018Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH) 
    1. Install the main body ECU (cowl side junction block LH) with the 2 nuts.

      Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

    2. Connect all connectors.
      3. Fig 2: Identifying Main Body ECU Nuts (Cowl Side Junction Block LH)
      G05832015Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  (See INSTALLATION )
  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See INSTALLATION )
  5. INSTALL SIDE INSTRUMENT PANEL LH  (See INSTALLATION )
  6. INSTALL FRONT DOOR OPENING TRIM COVER LH  (See INSTALLATION )
  7. INSTALL FRONT DOOR SCUFF PLATE LH  (See INSTALLATION )
scientia non olet · About LEMON Manuals