Transmission Wire: Installation

INSTALL TRANSMISSION WIRE
1. Coat a new O-ring with ATF and install it to the transmission wire.
  
  Fig 1: Identifying O-Ring From Transmission Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the transmission wire with the bolt.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
3. Connect the transmission wire connector.
Fig 2: Locating Transmission Wire Connector With Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT TRANSMISSION WIRE
1. Connect the 9 connectors to the solenoid valves.
  
  Fig 3: Locating Connectors To Solenoid Valves
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the ATF temperature sensor with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  Fig 4: Locating ATF Temperature Sensor With Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the 2 clamps with the 2 bolts.
  Torque: Bolt A
  
  6.4 N*m (65 kgf*cm, 57 in.*lbf)
Bolt B

10 N*m (102 kgf*cm, 7 ft.*lbf)

Fig 5: Locating Clamps With Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL VALVE BODY OIL STRAINER ASSEMBLY
1. Coat a new O-ring with ATF.
2. Install the O-ring.
  
  Fig 6: Identifying O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the oil strainer with the 4 bolts.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
Fig 7: Locating Oil Strainer With Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
1. Install the 3 magnets in the oil pan.
  
  Fig 8: Identifying Magnets In Oil Pan
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install a new gasket and the oil pan to the transmission case with the 20 bolts.
  Torque: 4.4 N*m (45 kgf*cm, 39 in.*lbf)
  
  Fig 9: Locating Oil Pan Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY (See INSTALLATION )
ADD AUTOMATIC TRANSMISSION FLUID (See AUTOMATIC TRANSMISSION FLUID )
RESET MEMORY (See MANUAL SHIFTING TEST )