LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> A960E Automatic Transaxle >> Park / Neutral Position Switch >> Removal

Park / Neutral Position Switch: Removal

  1. SEPARATE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY  (See REMOVAL )
  2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY 
    1. Disconnect the park/neutral position switch connector.
      Fig 1: Disconnecting Park/Neutral Position Switch Connector
      G05318182Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the nut and transmission control shaft lever RH.
      Fig 2: Locating Transmission Control Shaft Lever RH Nut
      G05318183Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Using a screwdriver, pry out the lock washer.
    4. Remove the lock nut and lock washer.
      Fig 3: Prying Out Lock Washer
      G05318184Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Remove the bolt and park/neutral position switch.
    Fig 4: Locating Park/Neutral Position Switch Bolt
    G05294773Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals