Valve Body Assembly: Removal

DRAIN AUTOMATIC TRANSMISSION FLUID (See REMOVAL )
REMOVE NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY (See REMOVAL )
REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY (See REMOVAL )
REMOVE VALVE BODY OIL STRAINER ASSEMBLY (See REMOVAL )
DISCONNECT TRANSMISSION WIRE (See REMOVAL )
REMOVE TRANSMISSION VALVE BODY ASSEMBLY
1. Remove the 20 bolts and valve body.
  
  Fig 1: Locating Bolts And Valve Body
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Separate the lever pin from the manual valve.
  NOTE:
  - Do not remove the check ball and each piston.
  - Cover the valve body with a plastic bag, etc. to prevent dust or trash from entering.
    
    Fig 2: Identifying Lever Pin And Manual Valve
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the check ball body and spring.
  NOTE: Do not drop the check ball body and spring.
  
  Fig 3: Identifying Check Ball Body And Spring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002