LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (A960E Automatic Transaxle) >> Transmission Wire >> Inspection

Transmission Wire: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT TRANSMISSION WIRE 
    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance 

    STANDARD RESISTANCE SPECIFICATION

    ATF Temperature Specified Condition
    20°C (68°F) 3 to 4 kΩ
    110°C (230°F) 0.22 to 0.28 kΩ

    If the resistance value is not as specified, replace the transmission wire.

    Fig 1: Identifying Transmission Wire Connectors
    G05288208Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals