LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Automatic Transaxle) >> Shift Paddle Switch >> Removal

Shift Paddle Switch: Removal

WARNING: This page is about a different car, the 2008 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD 
  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (See PRECAUTION ).
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
  3. REMOVE LOWER NO. 2 STEERING WHEEL COVER  (See REMOVAL )
  4. REMOVE LOWER NO. 3 STEERING WHEEL COVER  (See REMOVAL )
  5. REMOVE STEERING PAD  (See REMOVAL )
  6. REMOVE STEERING WHEEL ASSEMBLY  (See REMOVAL )
  7. REMOVE SHIFT PADDLE SWITCH 
    1. Disconnect the clamp from the steering wheel assembly.
    2. Disconnect the switch wire connector from the steering wheel assembly.
      Fig 1: Identifying Steering Wheel Assembly Connector And Clamp
      G05824188Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disconnect the 2 connectors from the 2 shift paddle switches, and remove the switch wire.
      Fig 2: Identifying Switch Wire
      G05824189Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the 4 screws, 2 brackets and 2 shift paddle switches.
      Fig 3: Identifying Shift Paddle Switches, Brackets And Screws
      G05824190Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals