LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (4GR-FSE) - System And Component Testing, On-Vehicle Inspection, Removal, Inspection & Installation >> Mass Air Flow Meter >> Removal

Mass Air Flow Meter: Removal

  1. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  2. REMOVE ENGINE ROOM SIDE COVER RH  (See REMOVAL )
  3. REMOVE MASS AIR FLOW METER 
    1. Disconnect the MAF meter connector.
      Fig 1: Locating MAF Meter Connector And Clamp From Air Cleaner
      G05285374Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws and MAF meter.
    3. Remove the O-ring from the MAF meter.
scientia non olet · About LEMON Manuals