Ignition Coil: Removal

DISCONNECT BATTERY NEGATIVE TERMINAL
REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE COOL AIR INTAKE DUCT SEAL (See REMOVAL )
REMOVE ENGINE ROOM SIDE COVER RH (See REMOVAL )
REMOVE ENGINE ROOM SIDE COVER LH (See REMOVAL )
DISCONNECT NO. 2 VENTILATION HOSE
1. Disconnect the ventilation hose from the cylinder head.
REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE
REMOVE INTAKE AIR SURGE TANK ASSEMBLY (See REMOVAL )
REMOVE IGNITION COIL ASSEMBLY

Fig 1: Connecting Ventilation Hose To Cylinder Head Cover With Clamp
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Disconnect the 6 ignition coil connectors.
2. Remove the 6 bolts and the 6 ignition coil assemblies.
  
  Fig 2: Locating Ignition Coils
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002