LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 AWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel (4GR-FSE) >> Fuel Pump Resistor >> Removal

Fuel Pump Resistor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  3. REMOVE ENGINE ROOM RH SIDE COVER  (See REMOVAL )
  4. REMOVE FUEL PUMP RESISTOR 
    1. Disconnect the connector and clamp from the fuel pump resistor.
    2. Remove the 3 bolts and fuel pump resistor, and disconnect the ground wires.
      Fig 1: Locating Bolts, Fuel Pump Resistor And Ground Wires
      G05826431Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals