LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 AWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior >> Rear Sunshade Assembly >> Removal

Rear Sunshade Assembly: Removal

  1. REMOVE REAR SEAT CUSHION ASSEMBLY  (See REMOVAL )
  2. REMOVE REAR SEAT HEADREST ASSEMBLY 
  3. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY 
  4. REMOVE REAR SEATBACK ASSEMBLY  (See REMOVAL )
  5. REMOVE REAR DOOR SCUFF PLATE LH  (See REMOVAL  )
  6. REMOVE REAR DOOR SCUFF PLATE RH 
  7. REMOVE REAR SEAT SIDE GARNISH LH  (See REMOVAL  )
  8. REMOVE REAR SEAT SIDE GARNISH RH 
  9. REMOVE ROOF SIDE INNER GARNISH LH  (See REMOVAL  )
  10. REMOVE ROOF SIDE INNER GARNISH RH 
  11. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY 
    1. Remove the bolt and separate the floor side of the rear seat 3 point type belt assembly LH.

      HINT:

      Use the same procedures for the RH side and the LH side.

      Fig 1: Identifying Package Tray Trim Panel Bolt
      G05320196Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and separate the floor side of the rear seat inner with center belt assembly RH.
      Fig 2: Identifying Rear Seat Inner Bolt
      G05320197Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the 3 clips and raise the front portion of the package tray trim panel assembly.
      Fig 3: Identifying Package Tray Trim Panel And Clips
      G05833697Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the 2 claws and remove the rear seat shoulder belt covers.

      HINT:

      Use the same procedure for the other 2 rear seat shoulder belt covers.

      Fig 4: Identifying Rear Seat Shoulder Belt Covers Claws
      G05833698Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Pass the 3 rear seat belt floor anchors through the holes in the package tray trim panel assembly.
    6. Remove the package tray trim panel assembly.
  12. REMOVE HIGH MOUNTED STOP LIGHT SET  (See REMOVAL )
  13. REMOVE NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY 
    1. Disengage the 3 clips and 5 claws, and remove the No. 2 package tray trim panel assembly.
      Fig 5: Identifying No. 2 Package Tray Trim Panel Assembly Clips And Claws
      G05833699Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. REMOVE REAR WINDOW SHADE ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the 4 bolts < A >.
    3. Loosen the bolt < B > and remove the rear window shade assembly.
      NOTE: Bolt < B > cannot be removed from the rear window shade assembly.
      Fig 6: Identifying Rear Window Shade Assembly Bolts
      G05833700Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. REMOVE REAR SUNSHADE RELAY 
    NOTE: When disassembling the rear sunshade assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.
    1. Remove the screw.
    2. Disengage the 4 claws and remove the rear sunshade relay cover.
      Fig 7: Identifying Rear Sunshade Relay Cover Claws And Screws
      G05254637Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disconnect the connector.
    4. Remove the 2 screws and the rear sunshade relay.
    Fig 8: Locating Rear Sunshade Relay Screws And Connector
    G05254638Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals