High Intensity Discharge Headlight Bulb: Installation

1. Install the discharge headlight bulb.
   NOTE: After the discharge headlight bulb is replaced, make sure that it comes on. Then, reinstall all the parts that were removed to replace the bulb.
   Fig 1: Identifying Discharge Headlight Bulb

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install a new headlight gasket.
   NOTE: After the headlight gasket is removed, be sure to replace it with a new one. Failure to do this may cause water ingress.

1. Install the washer hose with the bolt.

   Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

   Fig 2: Identifying Bolt And Washer Hose

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION ).