Inspection Procedure

CHECK PANEL SWITCH
1. Check for foreign matter around the switch that might prevent operation.
  OK: No foreign matter is found.
  
  NG: REMOVE ANY FOREIGN MATTER
  
  OK: Go to Next Step
CHECK PANEL SWITCH (DISPLAY CHECK MODE)
1. Enter the DISPLAY CHECK MODE (Panel Switch Check Mode)
  
  Fig 1: Identifying Tester Display - Panel Switch Check Mode
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Operate the abnormal switch and check if the switch name and status are correctly displayed.
  OK: The switch name and status are correctly displayed as operated.
  
  NG: PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE
  
  OK: REPLACE MULTI-DISPLAY