Camshaft Timing Control Motor: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION )
REMOVE COOL AIR INTAKE DUCT SEAL (See REMOVAL )
REMOVE ENGINE ROOM SIDE COVER LH (See REMOVAL )
REMOVE ENGINE ROOM SIDE COVER RH (See REMOVAL )
REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE NO. 1 AIR CLEANER INLET (See REMOVAL )
REMOVE AIR CLEANER CAP SUB-ASSEMBLY (See REMOVAL )
REMOVE AIR CLEANER CASE SUB-ASSEMBLY (See REMOVAL )
REMOVE CAMSHAFT TIMING CONTROL MOTOR RH
1. Disconnect the 2 camshaft timing control motor connectors and 2 clamps.
  
  Fig 1: Locating Camshaft Timing Control Motor Connectors And Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bolt and engine wire bracket.
  
  Fig 2: Locating Bolt And Engine Wire Bracket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 3 bolts and camshaft timing control motor.
4. Remove the O-ring from the timing chain cover.
  
  Fig 3: Locating Bolts And Camshaft Timing Control Motor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CAMSHAFT TIMING CONTROL MOTOR LH
1. Disconnect the 2 camshaft timing control motor connectors and 2 engine wire clamps.
  
  Fig 4: Locating Camshaft Timing Control Motor Connectors And Engine Wire Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bolt and engine wire bracket.
  
  Fig 5: Locating Bolt And Engine Wire Bracket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 3 bolts and camshaft timing control motor.
4. Remove the O-ring from the timing chain cover.
  
  Fig 6: Locating Bolts And Camshaft Timing Control Motor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002