LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> GS 460 >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Mirror >> Outer Mirror Switch >> Installation

Outer Mirror Switch: Installation

  1. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY 
    1. Connect each connector.
    2. Attach the 2 claws to install the control panel.
    3. Install the 2 screws.
  2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See INSTALLATION )
  3. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY  (See INSTALLATION )
  4. INSTALL INSTRUMENT SIDE PANEL LH  (See INSTALLATION )
  5. INSTALL FRONT DOOR OPENING TRIM COVER LH  (See INSTALLATION )
    Fig 1: Locating Integration Control And Panel Assembly Screws
    G05300345Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSTALL FRONT DOOR SCUFF PLATE LH  (See INSTALLATION )
  7. INSTALL INSTRUMENT PANEL FINISH PANEL END LH  (See INSTALLATION )
  8. INSTALL CONSOLE UPPER PANEL ASSEMBLY  (See INSTALLATION )
  9. INSTALL FRONT CONSOLE UPPER PANEL GARNISH  (See INSTALLATION )
  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  11. PERFORM INITIALIZATION 
    1. Perform initialization (See INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  12. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (See DIAGNOSIS SYSTEM ).
scientia non olet · About LEMON Manuals