Door Control Transmitter: Replacement

REMOVE TRANSMITTER SUB-ASSEMBLY MODULE SET DOOR CONTROL
NOTE: Take extra care when handling these precision electronic components.
1. Remove the transmitter cover.
  1. Remove the mechanical key.
  2. Insert a precision screwdriver into the gap, and turn the screwdriver to detach the cover.
    
    Fig 1: Removing Transmitter Cover
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the battery.
  1. Insert a precision screwdriver into the gap and remove the battery.
    
    Fig 2: Removing Battery
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL TRANSMITTER SUB-ASSEMBLY MODULE SET DOOR CONTROL
1. Install the battery.
  1. Install the new battery in the slot at an angle with the positive side facing up.
  2. Press down on the battery to set it in place.
    
    Fig 3: Pressing Down On Battery
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    NOTE:
    Be sure that the positive side and the negative side of the transmitter battery are matched correctly.
    
    Be careful not to bend the transmitter battery electrode while installing the battery.
    
    Keep the interior of the transmitter case free of dust, water and oil.
2. Install the transmitter cover.
  1. Install the cover by pressing down on it as shown in the illustration.
  2. Install the mechanical key.
    HINT:
    
    After the installation, press one of the transmitter's switches and check that the LED illuminates.
    
    Fig 4: Installing Transmitter Cover
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002