Inspection Procedure

1. Check that the GPS mark is displayed.

   OK: GPS mark is displayed. 

NG : GO TO " GPS MARK IS NOT DISPLAYED  " IN PROBLEM SYMPTOMS TABLE 

Fig 1: Display Screen Of GPS Mark

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

OK : Go to next step 

1. Enter the "Navigation Check" mode (Vehicle Sensors) (see NAVIGATION CHECK MODE  ).
2. While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check that these readings are almost equal.

   OK: The readings are almost equal. 

NG : GO TO "SPEED SIGNAL DOES NOT CHANGE IN NAVIGATION CHECK MODE" IN PROBLEM SYMPTOMS TABLE 

Fig 2: Diagnosis Menu Screen Display - Vehicle Sensor

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

OK : Go to next step 

1. Check that the display changes between ON and OFF according to the shift lever operation (P and R).

   OK 

   SHIFT LEVER POSITION CHART
   
   

   Shift Lever Position	Display
   P	OFF
   R	ON

   HINT:

   The display is updated once per second. It is normal for the display to lag behind the actual switch operation.

   Fig 3: Diagnosis Menu Screen Display - Vehicle Sensors

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NG : GO TO "REVERSE SIGNAL DOES NOT CHANGE IN THE NAVIGATION CHECK MODE" IN PROBLEM SYMPTOMS TABLE  (See PROBLEM SYMPTOMS TABLE  )

OK : PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE