Shift Lever Position Sensor: Inspection

INSPECT SHIFT LEVER POSITION SENSOR

Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.

Fig 1: Identifying Terminals Of Shift Lever Position Sensor Connector

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard resistance

TERMINALS RESISTANCE CHART

	7-1 (P)	7-2 (N)	7-3 (D)	7-4 (MJ)	7-5 (R)	7-6 (RV)	7-8 {B)	7-9 (FD)
P position	Below 1 Ω	4.2 to 5.1 kΩ	10 kΩ or higher	Below 1 Ω	10 kΩ or higher	10 kΩ or higher	10 kΩ or higher	10 kΩ or higher
R position	10 kΩ or higher	4.2 to 5.1 kΩ	10 kΩ or higher	Below 1 Ω	Below 1 Ω	Below 1 Ω	10 kΩ or higher	10 kΩ or higher
N position	10 kΩ or higher	Below 1 Ω	10 kΩ or higher	Below 1 Ω	10 kΩ or higher	10 kΩ or higher	10 kΩ or higher	10 kΩ or higher
D position	10 kΩ or higher	4.2 to 5.1 kΩ	Below 1 Ω	Below 1 Ω	10 kΩ or higher	1O kΩ or higher	10 kΩ or higher	Below 1 Ω
B position	10 kΩ or higher	4.2 to 5.1 kΩ	10 kΩ or higher	Below 1 Ω	10 kΩ or higher	10 kΩ or higher	Below 1 Ω	Below 1 Ω

If operation cannot be done as specified, replace the shift lever position sensor.