DTC Check / Clear
- CHECK DTC
- Connect the Techstream (with CAN VIM) to the DLC3.
- Turn the power switch ON (IG).
- Read the DTCs by following the directions on the tester's screen.
HINT:
- When using the Techstream with the power switch OFF to troubleshoot:
Connect the Techstream to the vehicle, and turn a courtesy light switch on and off at 1.5 second intervals until communication between the tester and vehicle begins.
- Refer to the Techstream operator's manual for further details.
- When using the Techstream with the power switch OFF to troubleshoot:
- CLEAR DTC
- Connect the Techstream (with CAN VIM) to the DLC3.
- Turn the power switch ON (IG).
- Erase the DTCs by following the directions on the tester's screen.
HINT:
- When using the Techstream with the power switch OFF to troubleshoot:
Connect the Techstream to the vehicle, and turn a courtesy light switch on and off at 1.5 second intervals until communication between the tester and vehicle begins.
- Refer to the Techstream operator's manual for further details.
- When using the Techstream with the power switch OFF to troubleshoot: